top of page
Get a quote

Laminate, 2Pac or Timber Veneer: Which Cabinet Finish Is Right for Your Perth Home?

Nov 13
4 min read

The right cabinet finish depends on how you use the space, the look you want and how much care you are happy to give it. Laminate is hard-wearing and low maintenance, 2pac is a sprayed paint finish available in almost any colour, and timber veneer is real wood. Below, 90 Degree Projects, a Perth custom cabinetmaker, explains how each finish works so you can choose with confidence.


Curved stone benchtop edge on timber-look cabinetry in a Perth home, installed by 90 Degree Projects

What is a laminate cabinet finish?


A laminate cabinet finish is a decorative surface made from paper impregnated with melamine resin, bonded to a board such as particleboard or MDF. It is often called melamine.


In Australia, Laminex and polytec are two of the best-known laminate brands, and both are suppliers we work with. polytec states its melamine products are made on E0 or E1 substrates, which are formaldehyde emission classes. Laminate suits busy households from Burns Beach to Pearsall because it is easy to wipe clean.


You may also see thermolaminated doors, where a vinyl film is formed over a shaped MDF door, which gives a profiled look without paint. polytec makes both laminate and thermolaminated doors, so ask which one you are being quoted.


What is 2pac, and why is it popular?


2pac is a two-part polyurethane paint, made by mixing a paint with a hardener. It is sprayed onto smooth MDF doors in a spray booth and then cured to a hard finish.


Because it is paint, 2pac comes in almost any colour, in gloss, satin or matt, and the edges are coated along with the face of the door. Like any painted surface, a hard knock on an edge can chip it, and repairs are a job for a professional. It suits homes in Cottesloe, Claremont and Dalkeith where a seamless, colour-matched look is the goal.


What is timber veneer?


Timber veneer is a thin sheet of real timber pressed onto a board such as MDF or particleboard. It gives you the grain and warmth of natural wood across large, stable panels.


Laminex offers its timber veneer in two types: natural, which shows the timber's own grain variation, and reconstituted, which gives a more consistent colour and grain. Because the timber layer is thin, veneer cannot be sanded back as many times as solid timber. It suits architectural homes in Nedlands, Floreat and City Beach.


Which cabinet finish is the most durable?


No finish is the most durable in every situation, because each one handles wear differently. Laminate resists scratches and stains well and needs little care. 2pac is hard and smooth, but edges can chip if knocked. Veneer needs more care around heat and water.


Whatever the finish, the board underneath matters too. polytec notes that wood-based panels cannot be made totally waterproof, so spills should be wiped up promptly. That advice holds in a beachside kitchen in Scarborough or Trigg as much as anywhere.


Which finish suits a kitchen, bathroom or laundry?


Any of the three finishes can work in a kitchen, bathroom or laundry when the board underneath is moisture resistant. Moisture-resistant particleboard is tested against the Australian and New Zealand standard AS/NZS 1859.1.


Many kitchens mix finishes. Laminex has shown kitchens pairing a timber-look island and tall cabinets with a matt white laminate, for example. Mixing works well in homes in Karrinyup, Carine and Gwelup, as long as the colours and edge details are planned together.

How do I look after my cabinet finish?


Look after most cabinet finishes by wiping them with a soft cloth and warm, soapy water. polytec's care guides say not to use abrasive cleaners, scouring pads, solvents, ammonia, bleach or acetone on its door products.


polytec also says the protective film on new doors and panels must be removed within three months of installation. Its doors carry a 7-year limited warranty, and not following the care instructions can void it. Simple habits keep cabinets looking right in North Beach and Mount Claremont for years.


Does the hardware matter as much as the finish?


Yes. The hinges and drawer runners decide how the doors and drawers feel every day, and how well they stay aligned.


Blum Australia covers its non-electrical hardware with a lifetime warranty. Our guide on whether custom cabinetry is worth it explains how hardware and materials come together in made-to-measure work. Good hardware matters as much in Wembley Downs and Churchlands as anywhere.


When should I talk to a cabinetmaker about finishes?


Talk to a cabinetmaker before you lock in a finish, ideally while the design is still being drawn. Some decisions are best made early:

  • See full-size samples in your own light, not just on a screen.

  • Plan how two finishes meet, including edges and colour.

  • Ask your cabinetmaker to quote each option for your design.

  • Read the care guide and warranty for the exact product before you sign off.


Every millimetre matters, and the finish you choose shapes how the details come together. Every job is overseen by Zak, from the first sample to the final fit.


Custom finishes, built for your space


90 Degree Projects is a Perth custom cabinetmaker that designs and builds high-end kitchens, wardrobes and full house fit-outs with precision in every detail.

Whatever finish you choose, your cabinetry should be built for your space, not off the shelf. Explore our custom kitchens and cabinetry services.


We work across Joondalup, Burns Beach, Carine, Karrinyup, Scarborough, City Beach, Floreat and Dalkeith. Get in touch or call 0450 217 801.

Comments


bottom of page